Leave Your Message
2G/3G/4G/5G Multi-band Communication Jammer for Drones High Power Outdoor Type Technical Specification V2.0

Products

2G/3G/4G/5G Multi-band Communication Jammer for Drones High Power Outdoor Type Technical Specification V2.0

Based on SDR (Software Defined Radio) architecture design and development, it complies with 3GPP protocol standards, supports 2G/3G/4G/5G mobile networks including TDD/FDD, and carries out precise jamming, interfering only with terminal-side equipment, without any interference with base stations, and does not affect or hinder the operator's public communication services.
It can effectively shield/interrupt the transmission of wireless communication signals of mobile communication networks such as 2G/3G/4G/5G, including voice, SMS, data uploading/downloading and other services, and the shielding effect covers the mainstream application frequency bands of operators.
Low transmit power, good interference effect, based on signalling shielding technology, compared with other suppression jamming equipment using high-power digital synthesis technology (DDS) method, low transmit power, good interference effect, interference method using the same base station 3GPP communication protocol standard signalling method, to meet the accurate shielding of all frequency bands of the GSM, CDMA, WCDMA, LTE, TDD, SA system. 
Support smooth upgrading, for operators' network upgrading, from 2G to 5G, the shield only needs software configuration can be achieved, which is better than the traditional jammer that requires hardware replacement, thus reduce customers’investment. Support unified network management platform architecture, a single device can be used independently, large-scale network support network management platform unified management.

    System features

    Self-adaptive, plug and play, automatic scanning of the specified network band information, automatic configuration without complex parameter settings, network bands are not limited to the existing domestic frequency bands.
    The device can be used after power on, without any parameter settings, some scenes can be adjusted through the power to control the coverage.
    Supports 9 frequency bands for wireless communication, the bands include 750-820MHz, 860-960MHz, 1700-1900MHz, 1900-2000MHz, 2100-2200MHz, 2300-2400MHz, 2500-2700MHz, 3300MHz-3600MHz, 4800-3600MHz and 1600-3600MHz. 3600MHz, 4800-5000MHzh.
    This product supports all modes of 2G, 3G, 4G, 5G interference in the above 9 frequency bands.

    Product Principle

    The equipment consists of 9-channel RF amplifier unit and 4 high-power cavity combiner units, 2pcs 6-channel 2G/3G/4G/5G signalling interference source and power supply unit.
    Start up by scanning the downlink signals of each frequency band of the base station, automatically configuring interference frequency points, synthesizing signals to generate 2G, 3G, 4G, and 5G signaling level interference signals, which are output to the antenna through a power amplifier, and the device turns on RF power to interfere with the mobile phone.

    Technical specifications

                                     Item                                                                               Technical parameters

    Output port(4)

    Case A:750-820MHz,860-960MHz,1700-1900MHz,1900-2000MHz,2100-2200MHz。 Case B:2300-2400MHz,2500-2700MHz,3300-3600MHz,4800-5000MHz。

    RF Power

                                                              Antenna port test, each channel ≧46dBm

    Support for jamming methods

    Supported configurations per channel: 5pcs 4G LTE or 5GNR carriers, 8pcs WCDMA carriers, 24pcs GSM carriers  

    In-band fluctuation

                                                                           Fluctuation ≤2dB per channel

    Gain Adjustment Range

    30dB

    Gain Adjustment Step

    1dB

    Output voltage VSWR

    ≤1.5

    Out of band stray

    9KHz~1GHz   ≤-36dBm

    1GHz~12.75GHz ≤-30dBm

    Power consumption

    Case A 1500W+ Case B 750W

    Open circuit protection

    In working mode, at rated power output and with the output port open, the module will not be damaged for 10 minutes and the performance indicators of the module will not deteriorate.

    Power supply

    AC 305V/85V

    Size(L*w*h) (mm)

    500mm*440mm*315mm *2(sets)

    Net weight(kg)

    35KG*2

    RF interface

    4*50Ω/N-J

    Mating Antenna

    4 high-gain fibreglass omni-directional antennas (antenna gain 5-7 dBi)

    Interface Type

    Local communication: TCP/IP, RJ45 Ethernet port

    Operating Temperature

    -25℃ ~ 55℃(ambient temp)forced air cooling

    Storage Temperature

    -45℃~85℃

    Humidity

    ≤95%

    Protection Rating

    IP65(Outdoor)

    Remarks: Use of omni-directional antennas with a coverage distance of not less than 350 metres radius (RSRP of the public network base station does not exceed -90 dBm)

    Product appearance

    Appearance refer to the following picture
    bn0ha5wa


                                                   Installation diagram