VEM Video Encryption Equipment
1:Principle of video encryption:
After collect CVBS videos and perform AD (analog-to-digital) conversion. The converted digital signal is encrypted through FPGA, and the video image is reprocessed. Then perform DA(digital-to-analog) conversion to generate a standar CVBS and output to the transmitter as shown in Figure (1)
Principle diagram as below:
Figure 1
2:Hardware connection:
1:Scrambling connection
Each pin definition
1:DC GND
2:DC 5-15V
3:Video GND
4:Video in(Connect to the camera or flight control OSD output)
5:Video GND
6:Video out(connect Tx)
7:TTL TXD
8:TTL GND
9:TTL RXD